| Size | XS | S | M | L | XL |
| Neck to Shoulder | 9.8 | 10.2 | 10.6 | 11 | 11.4 |
| Sleeve Length | 2'1.2" | 2'1.6" | 2'2" | 2'2.4" | 2'2.8" |
| Shoulder to shoulder | 1'7.7" | 1'8.5" | 1'9.3" | 1'10" | 1'10.8" |
| Upper arm width | 9.1 | 9.4 | 9.8 | 10.2 | 10.6 |
| Forearm width | 5.7 | 6 | 6.3 | 6.6 | 6.9 |
| Chest | 1'10" | 1'11" | 2'0.02" | 2'1" | 2'2" |
| Waist | 1'10" | 1'11" | 2'0.02" | 2'1" | 2'2" |
| Hip | 1'10" | 1'11" | 2'0.02" | 2'1" | 2'2" |
| Sleeve cuff | 5.2 | 5.5 | 5.7 | 5.9 | 6.2 |
| Neck Height | 3.9 | 3.9 | 3.9 | 3.9 | 3.9 |
| Front length | 2'10.6" | 2'10.8" | 2'11.8" | 3'0.02" | 3'0.6" |
| Hood Width | 9.8 | 10 | 10.2 | 10.4 | 10.6 |
| Hood Height | 1'2.6" | 1'2.8" | 1'3" | 1'3.2" | 1'3.4" |
To find your measurements, take a similar jacket that fits you comfortably. Button all the buttons or zip it up. Lay it flat on a surface, smooth out any wrinkles, and ensure the side seams are aligned at both ends. Make sure the sleeves are fully extended
Measure from the middle of the neck to end of shoulder (where the sleeve starts).
Measure from the shoulder to the wrist.
Measure this length from one shoulder to another.
Place the measuring tape in the middle of the upper arm and measure from one side of the sleeve to the other.This measurement is important when it comes to bicep size.
Place the measuring tape in the middle of the forearm and measure from one side of the sleeve across to the other.
Measure around the fullest part, place the tape close under the arms and make sure the tape is flat across the back.
Place the measuring tape where the natural waist would fall, usually a bit lower than halfway down the blazer, and measure from one side of the jacket across to the other.
Measure from one of the bottom corners of the jacket across to the other.
Measure the width of the sleeve by placing the measuring tape at one corner of the sleeve hold and pulling it across to the other side.
Place the measuring tape at the base of the neck where it meets the shoulders and measure vertcally up to the top of the collar.
Measure from the highest point of the shoulder to the desired hemline.
Measure from the base of the hood where it attaches to the collar, up to the highest point of the hood.
Place the measuring tape at one side of the hood where it meets the jacket and pull it across the opposite side.
Sizes can vary because they are measured by hand.
